Submersible Level Transducer 0-10mH2O 10m
Cable Level Transmitter Level Sensor
|
|
Description
|
Technical Parameters:
|
Measurement Range
|
0-10mH2O/100kPa
|
Cable Length
|
We will offer 10 meters in order to make sure the enough
length
|
Measurement Medium
|
Water
|
Power Supply
|
24-32VDC
|
Output Signal
|
4-20mA
|
Accuracy
|
±0.5%FS
|
Overload Capacity
|
Two times full-scale pressure
|
Using Temperature
|
0c—70℃
|
Compensation Temperature Range
|
0c—60℃
|
ZTC: (typical)
|
±0.02%FS/℃
|
STC: (typical)
|
±0.02%FS/℃
|
Long-term Stability (typical)
|
±0.1%FS/year
|
Waterproof Class
|
IP68
|
Load Resistance
|
less than (U-10)/0.02Ω
|
Shell Material
|
316L stainless steel
|
Explosion-proof Type
|
Exia II CT6
|
|
|
Notice
|
1.Prevent from the surge voltage, over-voltage, over-current and the protection
|
of reversed polarity.
|
2.Do the test to make sure the ability of overload resistance and
shock resistance, precisely
|
ensure the overload capacity.
|
3. Implement the electromagnetic interference resistance to avoid the problem
taken place
|
under
the
condition
of
complicated electromagnetism
environment.
|
4.All sensitive chips are from the imported
OEM parts, in order to keep the long-term stability.
|
Caution:
|
1.The measurement medium should be compatible with stainless steel.
|
2.Don't connect the wires when the power is on,connect the power after checking the connection wires.
|
3.Shell and power should be connected with earth; don't change the welded parts and connected
|
wires of the outgoing products when customer use it.
|
4.Sensor is related to the precision device, don't disassemble, and what's more,
don't touch the
|
diaphragm, in case of break.
|
5.To avoid being submerged, please add waterproof box in the outdoors and don’t
block the vent
|
6.You can pull the line into a semi-circular and make the vent down.
|
What in the package :
|
Part description
|
Quantity
|
Part image
|
Submersible Water Level
Transducer Sensor 10m Cable
|
1pc
|
|
User's manual
|
1 pc
|
|
|
|
|